Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Size DN15 · 1/2" DN20 · 3/4" DN25 · 1" DN32 · 1"1/4 DN40 · 1"1/2 DN50 · 2" DN65 · 2"1/2 DN80 · 3" DN100 · 4"
Ref. RPM1260-2005
THROUGH-HULL BRONZE DN20 - 3/4" PN16- Size : DN20 - 3/4"
- Material : Bronze
- Pressure : PN16
- Certificate : RINA
- Thread : Male
In stock
€25.10excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN20 · 3/4" like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM2400-05
BALL VALVE BRONZE F/F DN20 - 3/4" PN16- Size : DN20 - 3/4"
- Material : Bronze
- Pressure : PN16
- Thread : Female / Female
In stock
€50.50excl. VAT
Other compatible choices (8)
- RPM444-2020 BALL VALVE BRONZE F/F DN20 - 3/4" PN40
- RPM2300-05 VALVE BRONZE BS LEVER STAINLESS STEEL GUIDI F/F DN20 - 3/4" PN16
- RPM2080-2005 BALL VALVE FULL BORE BODY F/F BRONZE DN20 - 3/4" PN32
- RPM2081-2005 BALL VALVE FULL BORE F/F BRONZE AND HANDLE STAINLESS STEEL DN20 - 3/4" PN32
- RPM2411V-205 BALL VALVE ISIS BRASS DZR F/F DN20 - 3/4" PN40
- RPM2415V-739 BALL VALVE COMPRESSION ISIS BRASS DZR F/F HANDLE STEEL DN20 - 3/4" PN40
- RPM2421V-205 BALL VALVE ISIS BRASS DZR F/F HANDLE BUTTERFLY DN20 - 3/4" PN40
- RPM2481V-205 BALL VALVE ISIS BRASS DZR F/F WITH EXTENSION DN20 - 3/4" PN40
-
3 Hose tail / barbed fitting
Male hose tail DN20 · 3/4", same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004B-2140
HOSE TAIL M BRONZE DN20 - 3/4" X 20 PN40- Size : DN20 - 3/4" x 20
- Material : Bronze
- Pressure : PN40
- Certificate : RINA
- Thread : Male
In stock
€9.00excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 20 mm barb.
Ref. RPMTMSSP-020
MARINGAS/SP HOSE EXHAUST RUBBER DN20 PN3 BLACK LLOYD'S RINA- Size : DN20
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€23.26excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø25–40 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø29–31 mm). Two clamps at each end: double clamping below the waterline.
€3.68excl. VAT