Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Ref. RPM1121i-1005
THROUGH-HULL STAINLESS STEEL DN20 - 3/4"- Size : DN20 - 3/4"
- Material : Stainless steel
In stock
€32.83excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN20 · 3/4" like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM732FF-005
BALL VALVE F/F MONOBLOC STAINLESS STEEL 3/4"- Size : DN20 - 3/4"
- Material : Stainless steel
- Thread : Female / Female
In stock
€35.75excl. VAT
Other compatible choices (5)
- RPM7151-05 BALL VALVE F/F 2PCS STAINLESS STEEL 3/4"
- RPM2601X-205 BALL VALVE ALBA F/F STAINLESS STEEL DN20 - 3/4" PN64
- RPM2611X-205 BALL VALVE ALBA F/F STAINLESS STEEL HANDLE BUTTERFLY DN20 - 3/4" PN100
- RPM2621X-205 VALVE SUNNY F/F STAINLESS STEEL POLISHED MIROIR DN20 - 3/4" PN64
- RPM7542-10 BALL VALVE STAINLESS STEEL F/F NPT DN20
-
3 Hose tail / barbed fitting
Male hose tail DN20 · 3/4", same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004I-3420M
HOSE TAIL M STAINLESS STEEL 3/4" 20- Size : 3/4" x 20
- Material : Stainless steel
- Thread : Male
In stock
€6.98excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 20 mm barb.
Ref. RPMTMSSP-020
MARINGAS/SP HOSE EXHAUST RUBBER DN20 PN3 BLACK LLOYD'S RINA- Size : DN20
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€23.26excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø25–40 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø29–31 mm). Two clamps at each end: double clamping below the waterline.
€3.68excl. VAT