Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Ref. RPM1121i-1007
THROUGH-HULL STAINLESS STEEL DN30 - 1"1/4- Size : Ø30 - 1"1/4
- Material : Stainless steel
In stock
€53.95excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN32 · 1"1/4 like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM7151-07
BALL VALVE F/F 2PCS STAINLESS STEEL 1"1/4- Size : DN32 - 1"1/4
- Material : Stainless steel
- Thread : Female / Female
In stock
€48.85excl. VAT
-
3 Hose tail / barbed fitting
Male hose tail DN32 · 1"1/4, same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004I-11438M
HOSE TAIL M STAINLESS STEEL 1"1/4 38- Size : 1"1/4 x 38
- Material : Stainless steel
- Thread : Male
In stock
€22.95excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 38 mm barb.
Ref. RPMTMSSP-038
MARINGAS/SP HOSE EXHAUST RUBBER DN38 PN3 BLACK LLOYD'S RINA- Size : DN38
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€28.35excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø40–60 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø48–51 mm). Two clamps at each end: double clamping below the waterline.
€4.10excl. VAT