Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Ref. RPM1121i-1008
THROUGH-HULL STAINLESS STEEL DN40 - 1"1/2- Size : DN40 - 1"1/2
- Material : Stainless steel
- Pressure : PN16
In stock
€53.95excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN40 · 1"1/2 like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM2621X-208
VALVE SUNNY F/F STAINLESS STEEL POLISHED MIROIR DN40 - 1"1/2 PN40- Size : DN40 - 1"1/2
- Material : Stainless steel
- Pressure : PN40
- Thread : Female / Female
On order
€212.78excl. VAT
-
3 Hose tail / barbed fitting
Male hose tail DN40 · 1"1/2, same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004I-140M
HOSE TAIL M STAINLESS STEEL 316 DN40 - 1"1/2-40- Size : DN40 - 1"1/2 - Ø40
- Material : Stainless steel
- Thread : Male
In stock
€20.30excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 40 mm barb.
Ref. RPMTMSSP-040
MARINGAS/SP HOSE EXHAUST RUBBER DN40 PN3 BLACK LLOYD'S RINA- Size : DN40
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€31.04excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø40–60 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø48–51 mm). Two clamps at each end: double clamping below the waterline.
€4.10excl. VAT