Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Ref. RPM1121i-1009
THROUGH-HULL STAINLESS STEEL DN50 - 2"- Size : DN50 - 2"
- Material : Stainless steel
- Pressure : PN16
In stock
€92.28excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN50 · 2" like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM7151-09
BALL VALVE F/F 2PCS STAINLESS STEEL 2"- Size : DN50 - 2"
- Material : Stainless steel
- Thread : Female / Female
In stock
€115.91excl. VAT
-
3 Hose tail / barbed fitting
Male hose tail DN50 · 2", same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004I-270M
HOSE TAIL M STAINLESS STEEL 2" 70- Size : 2" x 70
- Material : Stainless steel
- Thread : Male
In stock
€23.13excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 70 mm barb.
Ref. RPMTMSSP-070
MARINGAS/SP HOSE EXHAUST RUBBER DN70 PN3 BLACK LLOYD'S RINA- Size : DN70
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€52.16excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø70–90 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø80–85 mm). Two clamps at each end: double clamping below the waterline.
€4.85excl. VAT