Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Brass: economical, but it dezincifies when permanently immersed in seawater. Keep it for protected circuits or plan to replace it; the cart will remind you.
Size DN10 · 3/8" DN15 · 1/2" DN20 · 3/4" DN25 · 1" DN32 · 1"1/4 DN40 · 1"1/2 DN50 · 2" DN65 · 2"1/2 DN80 · 3" DN100 · 4"
Ref. RPM1121-1010
THROUGH-HULL BRASS DN65 - 2"1/2 PN16- Size : DN65 - 2"1/2
- Material : Brass
- Pressure : PN16
- Certificate : RINA
- Thread : Male
In stock
€98.00excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN65 · 2"1/2 like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM0901N-210
BALL VALVE COMET BRASS F/F HANDLE ALUMINIUM DN65 - 2"1/2 PN40- Size : DN65 - 2"1/2
- Material : Brass
- Pressure : PN40
- Thread : Female / Female
In stock
€247.32excl. VAT
Other compatible choices (8)
- RPM2411V-210 BALL VALVE ISIS BRASS DZR F/F DN65 - 2"1/2 PN20
- RPM0801N-410 VALVE ASTER SHORT F/F BRASS LEVER ALUMINIUM DN65 - 2"1/2 PN40
- RPM1607NPT-5 BALL VALVE BRASS F/F NPT DN65 - 2"1/2 PN30
- RPM1850-1210 BALL VALVE FULL BORE SERIES "2000" F/F BRASS DN65 - 2"1/2 PN25
- RPM444-2065 BALL VALVE BRONZE F/F DN65 - 2"1/2 PN40
- RPM2300-10 VALVE BRONZE BS LEVER STAINLESS STEEL GUIDI F/F DN65 - 2"1/2 PN16
- RPM2080-2010 BALL VALVE FULL BORE BODY F/F BRONZE DN65 - 2"1/2 PN32
- RPM444-2065NPT BALL VALVE BRONZE F/F DN65 - 2"1/2 PN40
-
3 Hose tail / barbed fitting
Male hose tail DN65 · 2"1/2, same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004-1197
HOSE TAIL M BRASS DN65 - 2"1/2 X 65 PN20- Size : DN65 - 2"1/2 x 65
- Material : Brass
- Pressure : PN20
- Certificate : RINA
- Thread : Male
In stock
€29.30excl. VAT
Other compatible choices (1)
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 65 mm barb.
Ref. RPMTMSSP-065
MARINGAS/SP HOSE EXHAUST RUBBER DN65 PN3 BLACK LLOYD'S RINA- Size : DN65
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€44.70excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø70–90 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø74–79 mm). Two clamps at each end: double clamping below the waterline.
€4.85excl. VAT