Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Size DN15 · 1/2" DN20 · 3/4" DN25 · 1" DN32 · 1"1/4 DN40 · 1"1/2 DN50 · 2" DN65 · 2"1/2 DN80 · 3" DN100 · 4"
Ref. RPM1260-2011
THROUGH-HULL BRONZE DN80 - 3" PN16- Size : DN80 - 3"
- Material : Bronze
- Pressure : PN16
- Certificate : RINA
- Thread : Male
In stock
€211.10excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN80 · 3" like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM2300-11
VALVE BRONZE BS LEVER STAINLESS STEEL GUIDI F/F DN80 - 3" PN16- Size : DN80 - 3"
- Material : Bronze
- Pressure : PN16
- Thread : Female / Female
In stock
€533.00excl. VAT
-
3 Hose tail / barbed fitting
Male hose tail DN80 · 3", same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004B-2187
HOSE TAIL M BRONZE DN80 - 3" X 75 PN20- Size : DN80 - 3" x 75
- Material : Bronze
- Pressure : PN20
- Certificate : RINA
- Thread : Male
On order
€87.50excl. VAT
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 75 mm barb.
Ref. RPMTMSSP-076
MARINGAS/SP HOSE EXHAUST RUBBER DN76 PN3 BLACK LLOYD'S RINA- Size : DN76
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€56.58excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø80–100 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø86–91 mm). Two clamps at each end: double clamping below the waterline.
€5.06excl. VAT