Configurator
From hull to engine
Build a complete seawater intake: each part is chosen to fit the previous one (material, thread, diameters). Choose the material and size of the through-hull: the rest of the kit fills in by itself, and you can then change any part.
-
1 Through-hull
Bronze, stainless steel or brass. Below the waterline in seawater, prefer bronze or stainless steel.
Brass: economical, but it dezincifies when permanently immersed in seawater. Keep it for protected circuits or plan to replace it; the cart will remind you.
Size DN10 · 3/8" DN15 · 1/2" DN20 · 3/4" DN25 · 1" DN32 · 1"1/4 DN40 · 1"1/2 DN50 · 2" DN65 · 2"1/2 DN80 · 3" DN100 · 4"
Ref. RPM1121-1011
THROUGH-HULL BRASS DN80 - 3" PN16- Size : DN80 - 3"
- Material : Brass
- Pressure : PN16
- Certificate : RINA
- Thread : Male
In stock
€128.50excl. VAT
-
2 Seacock
Female / female ball valve, BSP thread DN80 · 3" like the through-hull, in a material that does not form a galvanic couple with it.
Ref. RPM0901N-211
BALL VALVE COMET BRASS F/F HANDLE ALUMINIUM DN80 - 3" PN40- Size : DN80 - 3"
- Material : Brass
- Pressure : PN40
- Thread : Female / Female
In stock
€354.90excl. VAT
Other compatible choices (6)
- RPM2411V-211 BALL VALVE ISIS BRASS DZR F/F DN80 - 3" PN20
- RPM0801N-411 VALVE ASTER SHORT F/F BRASS LEVER ALUMINIUM DN80 - 3" PN40
- RPM1607NPT-6 BALL VALVE BRASS F/F NPT DN80 - 3" PN30
- RPM2300-11 VALVE BRONZE BS LEVER STAINLESS STEEL GUIDI F/F DN80 - 3" PN16
- RPM444-2080 BALL VALVE BRONZE F/F DN80 - 3" PN40
- RPM2080-2011 BALL VALVE FULL BORE BODY F/F BRONZE DN80 - 3" PN25
-
3 Hose tail / barbed fitting
Male hose tail DN80 · 3", same material rule. The barb diameter sets the inside diameter of the hose.
Ref. RPM1004-1189
HOSE TAIL M BRASS DN80 - 3" X 80 PN20- Size : DN80 - 3" x 80
- Material : Brass
- Pressure : PN20
- Certificate : RINA
- Thread : Male
In stock
€46.70excl. VAT
Other compatible choices (1)
-
4 Seawater suction hose
Lloyd's / RINA marked hose, inside diameter matched to the Ø 80 mm barb.
Ref. RPMTMSSP-080
MARINGAS/SP HOSE EXHAUST RUBBER DN80 PN3 BLACK LLOYD'S RINA- Size : DN80
- Material : Rubber
- Pressure : PN3
- Certificate : Lloyd's / RINA
In stock
€59.36excl. VAT per m
-
5 Hose clamps
Clamp worm-drive Ø80–100 mm, for the clamp size recommended by the Sati MARINGAS/SP technical sheet (Ø86–91 mm). Two clamps at each end: double clamping below the waterline.
€5.06excl. VAT