Press-fit fitting
A press-fit fitting is joined without welding: the pipe is pushed into the fitting, then a pressing tool fitted with jaws matching the fitting profile compresses the socket onto its O-ring. The fittings in this family use the M press profile, from Ø15 to Ø108.
Read more Show less
Two materials are available:
- 90/10 copper-nickel (CuNi10Fe1.6Mn), for seawater: according to the data sheets, green FKM seal, 16 bar maximum, from -20 to +220 °C and from -20 to +120 °C in seawater; applications listed: naval, seawater, compressed air, oil and diesel, solar;
- stainless steel, to be used with 316L stainless steel press-fit pipe (EN 10217-7, EN 10312).
The data sheets state Lloyd's and RINA for almost all models, and PN16 (PN6 for a few parts).
Available shapes: 90° and 15 to 60° elbows, tees, sockets, reducers, unions, plugs, stub ends, crossovers, bulkhead fittings, flanged sockets and threaded adaptors (EN 10226-1 thread on the copper-nickel models).
How to choose: the outside diameter of the pipe, in millimetres; the same material as the pipe; the seal suited to the fluid and temperature. Press-fit pipes are in the Copper-nickel pipe and Stainless steel pipe families.
63 products
Press-fit cap
Press-fit stub end
90° Press-fit elbow
See the 9 products “90° Press-fit elbow”
Press-fit flange adapter
Press-fit coupling
Press-fit bulkhead fitting
Press-fit straight connector
RPM6599-09
Fitting M/M Ø35 x 1"1/4
- Size :
- 1"1/4 - Ø35
- Connection :
- Threaded
€53.00 excl. VAT
€63.60 incl. VAT · list price
On order
Press-fit union
Press-fit reducer
Crossover bend
Press-fit tee
Press-fit elbow 15° to 60°
